Fixing of net protection

Very discreet, quick to install and economical. These net fasteners can be siliconized or screwed on their support. Ideal to protect a balcony, an interior courtyard, a windowsill... with an easily removable solution.  No need to drill except in case of deteriorated or porous support. Saves cables, tensioners, staples... Does not deteriorate the supports. 

General characteristics:

- Highly resistant to oxygen, ultraviolet light and alkaline salts.

- Very poor resistance to solvents, never use water repellent products in spraying.

- Adhesion: use of polyurethane glue or double-sided, its bonding surface is granulated for maximum adhesion. 

Technical data :

- Material : Virgin polycarbonate 100% anti-UV treated in the mass.

- Dimensions: 30 x 35 mm

- Thickness: max 10 mm

Tips:

- Suitable for any low/medium/high pressure area.

- When a place is occupied by birds, be careful to choose the mesh according to the size of the bird.

- For a 5 x 5 m net (50 mm or 19 mm mesh) you will need about 100 FIXNET®. 

Installation instructions:

- Optimal climatic conditions: temperature between + 5° C and + 30° C

- Shelter from the rain

- Preparation of the surface: dusting, drying (if necessary, brushing or degreasing).

- In certain cases, the preliminary application of a primer on the friable or very smooth porous supports is essential. 

Condition of the support:

- Can be applied on all types of buildings, statues, museums, factories, schools, interior courtyards, windows, doors, lampshades, balconies...

- The support must be clean, dry, sound, solid. 

Offered in unit or in box of 500 pieces.